Electro-cam PS-6144 Series Manual do Utilizador Página 106
- Página / 112
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
A-2 Appendix
Slimline Output Module Specifications
AC Outputs Part # EC-OAC240-3
Output Voltage: 24 VAC rms minimum
280 VAC rms maximum
Output Current: 30 mA rms minimum
3 amps rms maximum @/below 35°C (95°F).
Above 35°C derate 50 mA/°C (27.8 mA/°F)
Input Voltage: 5 VDC nominal
8 VDC maximum
Turn On Time: 100 µs maximum @ 60 Hz
Turn Off Time: 8.3 ms maximum @ 60 Hz
Off State Leakage: 2 mA AC rms @ 120 VAC rms, 60 Hz
Operating Temp. -30°C to +70°C (–22° to +158°F)
DC Output, 60 VDC Part # EC-ODC060-3
Output Voltage: 0 to 60 VDC
Output Current: 3 amps DC @/below 35°C (95°F)
Above 35°C derate 35.7 mA/°C (19.8 mA/°F)
Turn On Time: 50 µs maximum
Turn Off Time: 50 µs maximum
Off State Leakage: 1 µA DC maximum @ 24 VDC
Operating Temp. -30°C to +70°C (–22° to +158°F)
DC Outputs, 200 VDC Part # EC-ODC200-1 (SLIMLINE)
Output Voltage: 0 to 200 VDC
Output Current: 1 amp DC @/below 45°C (113°F).
Above 45°C derate 18 mA/°C (10 mA/°F)
Turn On: 50 µs maximum
Turn Off: 50 µs maximum
Off State Leakage: 1 µA maximum
Operating Temp. -30°C to +70°C (–22° to +158°F)
Analog Output, 0-10 VDC Part # EC-SANL-010V
Resolution: 12 Bits (4096 Increments)
Output Voltage: 0 to 10 VDC
Output Current: 10 mA maximum
Load Resistance: 1 K Ohm minimum
Linearity: ±0.3% full scale @ 25°C (77°F)
Analog Output, 4-20 mA Part # EC-SANL-420M
Resolution: 12 Bits (4096 Increments)
Output Current: 4 to 20 mA DC
Load Resistance: 450 Ohm maximum
Linearity: ±0.3% full scale @ 25°C (77°F)
Reed Relay Part# EC-ORR000-0 (SLIMLINE)
Output Type: N/O Reed Relay Contacts
Contact Rating: 10 VA maximum
Switching Voltage: 100 VDC or 130 VAC maximum
Switching Current: 0.5 A maximum
Carry Current: 1.5 A maximum
Turn On Time: 500 ms
Turn Off Time: 500 µs
Mechanical Life: 5 x 10
6
cycles
Operating Temp: -30 to +70°C (-22° to +158°F)
- PS-6144 Series 1
- Table of Contents 3
- Mechanical Cam Switches 5
- Programmable Limit Switches 5
- PS-6144 Description 6
- Basic Terminology 7
- PS-6144 Standard Features 7
- PS-6144 Optional Features 8
- General Mounting & Wiring 9
- PGM:1 RPM:1500 10
- MENU< POS: 180 10
- 2-3 Installation & Wiring 11
- 2-4 Installation & Wiring 12
- Controller Input Wiring 13
- 2-6 Installation & Wiring 14
- 2-7 Installation & Wiring 15
- Output Wiring 16
- Output Wiring (cont’d) 17
- Keypad Wiring 20
- DIP Switch Configurations 21
- Communications Wiring 23
- Resolver Installation 24
- Resolver Dimensions 25
- Resolver Cables 26
- Output Transistor Replacement 28
- Menu Tree 30
- Initial Programming 31
- OFFSET 3-16 31
- Analog Module Numbe 32
- Analog High RPM 32
- Analog Offset 32
- Number of Analog Output 33
- Communications 34
- Channel Copy 34
- Communications (Cont’d) 35
- Default Program 35
- LEVEL: OPERATOR 36
- PASSWORD: 1234 36
- Password Number 36
- View Program 37
- --- --- --- Program 37
- Enable Codes (cont’d) 37
- GROUP POSITION 38
- DISPLAY: EACH< 38
- Machine Speed 39
- Active Program 39
- Keyboard Quantity 40
- Input Status 40
- Motion ANDing 42
- Memory Tests 42
- Motion detection leve 43
- High RPM setpoint 43
- Low RPM setpoint 43
- Value for this Group 44
- 3-17 Programming 45
- Output Enable ANDing 46
- Output Groups 46
- Output Groups (Cont’d) 47
- Output Status 47
- Password 48
- Output Status (Cont’d) 48
- Password (Cont’d) 49
- Per Channel Enable 49
- Program Copy 49
- Pulse Copy 50
- Program Select Mode 50
- Pulse Copy (cont’d) 51
- Rate Setup 52
- SCALE 53
- FACTOR: 360< 53
- Program to view or modify 54
- Setpoints (Cont’d) 55
- CH:1 EDG 55
- Output Channel 56
- Speed Compensation (cont’d) 57
- Speed Comp Mode 57
- Timed Outputs 58
- Toggle RPM 58
- 4-1 Speed Compensation 59
- Standard Speed Comp 60
- Standard Speed Comp (Cont’d) 61
- Leading Trailing Speed Comp 62
- 4-5 Speed Compensation 63
- Speed Comp Guidelines 64
- Negative Speed Compensation 64
- Mode 1 Operation 67
- Mode 0 Operation 67
- Mode 2 Operation 68
- Mode 1 Operation (Cont’d) 68
- Mode 2 Operation (Cont’d) 69
- Mode 3 Operation 69
- Mode 4 Operation 70
- Mode 3 Operation (Cont’d) 70
- Mode 4 Operation (Cont’d) 71
- Mode 5 Operation 71
- Mode 5 Operation (cont’d) 72
- 6-1 Communications 73
- PLuSNET II Program (cont’d) 74
- 6-3 Communications 75
- Serial Commands 76
- Serial Commands (cont’d) 77
- Output group offset value 80
- Shaft position offset 80
- Checksum 84
- Error Codes 84
- 6-13 Communications 85
- 40279 Offset Mapping 86
- Motion Detection 86
- 40289 Analog High RPM 86
- Quick Reference 86
- 40310 Analog Quantity 87
- Discrete I/O 88
- Registers 89
- Registers (Cont'd) 90
- 40280 Group Index 91
- 40281 Group Offset 91
- 40288 Analog Offset 92
- 40308 Shaft Position 93
- 40309 Shaft Offset 93
- Bit 5: Motion detection 95
- Special Functions 98
- Controller Diagnostics 99
- Keypad Diagnostics 100
- ERROR: RESOLVER 101
- NOT CONNECTED! 101
- General Troubleshooting 102
- 7-5 Troubleshooting 103
- Fuse Part Numbers 104
- PS-6144 Controller Specs 105
- A-2 Appendix 106
- Resolver Specifications 107
- Factory Defaults 107
- A-4 Appendix 108
- Access Codes, Entering 3-20 109
- Analog Output 3-4 109
- Group Position Display 3-10 109
- Offset, Analog Output 3-4 110
- I-3 Index 111
- PRINTED IN U.S.A 256 10/01 112
Manuais e produtos relacionados com Routers Electro-cam PS-6144 Series
Routers Electro-cam 5000 Series Manual do Utilizador
(80 páginas)
(80 páginas)
Routers Electro-cam PL-1746 Manual do Utilizador
(8 páginas)
(8 páginas)
Routers Electro-cam PL-1746 Series Manual do Utilizador
(146 páginas)
(146 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.084 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais